A little inspiration. Something handmade.

How to Make Homemade Beard Oil With a Few Ingredients

This content may contain affiliate links. See my full disclosure here.

Homemade beard oil is made by filling a small glass bottle with a carrier oil, adding a few drops of essential oil for scent, then shaking gently to mix. That is the whole recipe. With jojoba oil and sweet almond oil in a 1/2 oz bottle and 5 drops each of peppermint and lavender, you can mix a small batch in a couple of minutes.

Beards are completely overlooked when it comes to personal grooming. Most bearded men shampoo their beards, and some take it a step further and opt for conditioner. But very few men make the leap to using beard oil.

Think about it—women use oil treatments in their hair, and many hair products have oil in them. That is the beauty of beard oil. It is quick and easy to make and to use. If you have any oils on hand, chances are that you are halfway there. Getting your hands on the ingredients might even be the hardest part, because once you have the supplies, you are really only mixing the different oils.

 %postname%

What you need

  • Carrier oil. I am using sweet almond oil and jojoba oil.

    (Note: You will sometimes hear carrier oils called “base oils.” They are used to dilute essential oils before the essential oils are applied to the skin. You only need one carrier oil to make beard oil, but you can use a mixture of as many as you would like. Other carrier oils that you are more likely to find in your local organic or healthy grocery store include apricot oil, grape seed oil, olive oil, castor oil, and coconut oil, among others. If you decide to use coconut oil, you will not be able to spray or use an eye dropper because coconut oil solidifies very easily.)

  • Essential oil. I am using a few drops of lavender and spearmint, both of which I already had on hand. These are purely for scent and are optional.
  • 1/2 oz or 1 oz spray bottle. I am using a 1/2 oz glass bottle with a spray top. I found it at Whole Foods.
  • Eye dropper or tiny funnel.

How to make beard oil

  1. Fill the bottle with carrier oil. Using your eye dropper or tiny funnel, fill your bottle with your carrier oil. I used an eye dropper to roughly measure a 50/50 mixture of jojoba and sweet almond oil. Make sure to leave a bit of room at the top for a few more drops of your essential oils.
  2. Add the essential oil. Using your eye dropper or tiny funnel, drop in your desired amount of essential oil. For a 1/2 oz bottle, I used 5 drops peppermint and 5 drops lavender. This is entirely up to you based on how strong you would like the scent to be, but remember that essential oils are much more powerful than carrier oils, so you do not want to go overboard. Follow your oil supplier’s dilution guidance.
  3. Shake gently to mix. Put the top on your beard oil bottle and very gently shake it to mix your oils. You are done.

You are done. It is really that easy.

How to use it

A few drops is plenty. Warm the oil between your palms first, then work it through the beard from the roots outward. Run your fingers or a comb through to spread it evenly.

Because the recipe uses such a small bottle, it suits a short routine rather than a heavy application. Start with less than you think you need and add another drop if you want more.

Scent ideas

The essential oils in this recipe are purely for fragrance, and they are optional. A carrier oil and a spray bottle alone will still give you a usable oil; the drops simply decide what it smells like.

Try one note at a time until you know what you like, then blend two. Lavender and spearmint, as used here, is a light and clean pairing. Keep the drops low: the scent will smell stronger in the bottle than you expect, and essential oils are much more powerful than carrier oils.

This is a fragrance choice, not a treatment, so pick whatever scent you enjoy wearing.

Storage

  • Keep your oil in a dark glass bottle, which protects it from light.
  • Store it in a cool place, away from direct sunlight and heat.
  • Label the bottle with the date you made it, so you know how long it has been sitting.
  • Keep the top screwed on firmly between uses and give it a gentle shake before you use it, since oils can separate.

A word on safety

Patch test first. Spot test new ingredients on a small area of skin before you use them on your beard, and do not use any ingredient you are allergic to. Stop if irritation occurs and do not keep using the oil.

Keep essential oils away from your eyes. Wash your hands after handling them.

Keep everything out of reach of children and pets. Essential oils are concentrated and should never be left where small hands or paws can get to them.

Follow your oil supplier’s dilution guidance. Their instructions are more reliable than any guess about how much essential oil is appropriate.

Check for nut allergies. Sweet almond oil is a nut-based carrier oil, so if you or the person who will use the oil has a nut allergy, choose a carrier oil that suits them or skip the recipe.

Do not use any homemade products without consulting with an appropriate medical professional first.

Make it a gift

A small batch of beard oil is a good handmade gift for the holidays, especially in a dark glass bottle with a homemade label showing the date.

Pair it with one or two other small homemade items so you have a little set to wrap. A whipped body butter or a jar of homemade bath salts works well alongside it, and a eucalyptus salt scrub or an easy peppermint and vanilla sugar scrub fits the same idea.

If you are making several gifts at once, DIY shower steamers are another small project that comes together quickly.

Frequently asked questions

How much beard oil does this recipe make?

One 1/2 oz bottle. The post also mentions a 1 oz bottle, if you would rather make a slightly larger batch. If you scale up, keep the same ratio of carrier oil to essential oils and follow your supplier’s dilution guidance.

Do I need both sweet almond oil and jojoba oil?

No. You only need one carrier oil to make beard oil, but you can use a mixture of as many as you like. This batch uses a rough 50/50 mix of jojoba and sweet almond oil.

Are the essential oils necessary?

No. Lavender and spearmint here are purely for scent and are optional. If you skip them, you still have a bottle of carrier oil to use.

Can I use coconut oil in my beard oil bottle?

You can use coconut oil as a carrier oil, but be aware that it solidifies very easily. If you use it, you will not be able to spray or use an eye dropper.

How should I store homemade beard oil?

In a dark glass bottle, in a cool place, labelled with the date you made it. Shake gently before each use.

Like this? Check out my DIY eucalyptus salt scrub recipe and my baked bath salts recipe.

Last updated: October 2026

Pin my tutorial for how to make homemade beard oil!